After months of searching on Craigslist I was not able to find a 7+ foot workbench that was made of solid wood. I was getting increasingly frustrated so I began looking online for different plans to make my own.
- 7 to 8 ft long ~2ft deep
- THICK wooden top (I wanted more for aesthetics than anything else)
- Heavy Duty Construction ( I didn’t want to think twice about putting 500 pounds on it )
After a while of searching I found an excellent starting point in an old Family Handyman article. I referenced this article for all the steps on the construction of the base and tabletop with several modifications:
- I wanted a 2×6 base mainly for looks but also because I intend to keep this workbench for my lifetime and want it to last at least that long.
- I also added some shelving to the crossbars underneath because it should have been there from the start and I had some leftover lumber from my earlier garage shelving project.
- I added a 45 degree chamfer on the table top since this is just pine and could otherwise be pretty easily marred on the corners.
- Lastly I inset a T-square in the corner of the table because I had an extra one lying around and I thought it could be useful.
- $61 — Lumber
- $50 — Used Vise off of Craigslist (looked new to me)
- $20 — Lag Bolts and Hardware
- $5 — Consumables (Wood Glue)
- FREE — 3″ Deck Screws — I had these leftover
- FREE — L Square — I had an extra
- $50 — New Table Saw Blade
- $56 — (3) 36″ Clamps
~$250 total mostly in new tools that I would have bought for something else. All in all I could not be happier with the result, it was just what I wanted and meets every one of my needs.
Bringing the lumber home
This little car has never carried so much lumber in its entire life. So many 2x4s but I made it all in one trip!